The hot melt glue machine is a device that melts hot melt glue. When it is not in operation, the hot melt glue in the main machine, hot melt hose and hot melt glue gun of the hot melt glue machine is cooled and left inside. When the manufacturer needs to use other hot-melt adhesives, it is not possible to directly add another hot-melt adhesive machine to the host, and the old adhesive must be cleaned. The following Tian Xiaobian will teach you a quick glue change method, which is suitable for replacing similar hot melt glue.
1. First, remove the glue stored in the hot melt glue machine. Heat the hot melt glue machine to the operating temperature to remove the glue stored in the glue box.
2. Wear protective gloves and scrub the inner wall of the melt box with a cloth that does not shed hair. Do not scrub with sharp tools.
3. Participate in some new glue after scrubbing and heat it to the operating temperature of the new glue.
4. After the hot melt glue in the hot melt glue machine is melted, remove the hot melt glue gun and drain the remaining glue in the hot melt hose. At this time, you can clean the hot melt glue gun. After the glue in the hot melt glue machine and the hot melt hose is drained, connect the hot melt glue gun. Add 1/3 of the new glue in the host, heat it to melt, and discharge the remaining glue in the hot melt glue gun.
5. Don't forget to clean the filter at the end. This method is relatively fast. Before replacing, be sure to ask the manufacturer of the hot melt glue applicator, follow their instructions, and change the glue at will. This is not responsible for yourself and the equipment.